Sunday, November 23, 2014
[Product Description] E-PAM (Emulsion-Polyacrylamide)
E-PAM (Emulsion-Polyacrylamide) of Hansol Chemical was developed through partnership with advanced technology of overseas and a next generation product. Compared with current powder and dispersion type product, it has an excellent flocculation performance, fast dissolution characteristic and economically efficient disposal method.
In particular, emulstion polyacrylamide produced by Hansol is such an advanced product that it can be widely applied to public facilities including industrial wastewater area of dye/textile, papermaking, leather, food, petrochemical, mine industry, urban sewage treatment plan and sanitary treatment
plant.
I. Characteristics of E-PAM of Hansol Chemical
1. Fast dissolution, easy to use, compared to P-PAM.
2. Emulsion type allows to automate your factory facilitie.
3. Applicable throughtout the whole process such as pressure flotation, flocculation, precipitation, condensation, dehydration, etc.
4. Selectible among various grades of the product according to the process that the customers take.
II. How to use E-PAM of Hansol Chemical
1. Dissolve - Dilute E-PAM with regular industrial water to 0.2~0.5%. Dissolve compltely stirring for 30~60 minutes before use.
2. Injection - Shake or stir before use, in case of phase separation behavior.
3. Amount of Injection - Depending on the circumstances and types of waste water, use E-PAM up to 15ppm during the first flocculation and precipitation process. Use 300ppm to the maximum while dehydrating.
III. Competitiveness of E-PAM of Hansol Chemical
1. Pros/Cons
1) Emulsion
(1) Pros
- Complete automation helps man power usability efficient.
- No dust, clean and safe.
- Storage tank helps save space.
- Able to change concentration (0.2~1.0%) depending on the required process.
- Centrigual easily with cross-linked molecular structure
- Much more excellent condensation and centrifugaling.
(2) Cons
- Freezing problems under -30 degree celcius.
- Short storage period compared to powder type.
2) Powder
(1) Pros
- Massive amount to store/long-term storage
- No freezing problems
(2) Cons
- Dust inhaling might cause industrial disaster
- Not elidgible for automation, long time to dissolve (2~3hrs), insoluble portion appears.
- Excessive invest funds needed compared to emulsion type.
- Unnecessary space needed for storage.
- Unable to reach high concentration (more than 0.4%).
- Linear molecular structure results inefficient rate of centrifugal concentration and dehydration.
2. Competitiveness of Emulsion
1) Various grades - Easy to adopt to changes. Various molecular structures that fit for each fields.
2) Convenience - Complete automation, no manpower needed.
- Stable operation for 24-hour long.
3) Cheap investment cost on facilitation - sewage treatment facility is cheaper than it is with powder.
4) Technical service - the best techniques. Responsibility and total management.
5) Harmless to human - No dust, bulk supply enhances work environment.
6) Job security - No accident due to exposure of the dust.
Wednesday, November 5, 2014
[Product Description] Electronic Material Product
Electronic material products of Hansol Chemical are composed of
materials for PDP,LCD,Mobile,TSP and electronic parts materials. Hence, we have
been studying and developing various display products and satisfied needs for
customers, which strengthens our competitiveness continuously.
We have several types of electronic material products, such as insulation and damp-proofing material, cleansing agent, OCR (Optical Clear Resin) for luminance improvement, fluorescent substance, radiant heat material, white EMC for LED reflection, etc.
Types of Electronic Material Product of Hansol Chemical
1. Conformal Coating Materials
- by coating it on the electrode joint part of FPD panel of display.
- Used to protect electrode from dusts and foreign objects.
- Superior damp-proofing and insulation
- Fast hardening : low radiation intensity, high hardening rate
- Good inner migration
2. PI Electrode Reinforcer
- OLED electrode joint part reinforcer/protector
3. OCR : Optical Clear Resin
- This is resin that Increases clarity of OLED/LCD display, shock resistancy and legibility on the outter surface.
- Substitute optical tape to UV hardening resin
- Elliminate the air layer and achieves the same refractive index with the cover glass.
- Improves luminance and contrast by reducing light scattering.
4. Side Sealing Resin
- Resin that is used to protect the side of panel and to block the light
5. Cleasning Solution (electrode protector/for OCR, etc)
- To prevent and cleaning nozzle hardening of dispenser method
- To clean OLB (Outer lead bonding) process, OCR and ACF rework
6. OLED Organic Insulation Film Material
- Is an organic insulation film material that can separate between two fluorescent substances of OLED display and helps two electrodes become short circuit.
Hansol Chemical is putting its effort to increase competitivness of product cost and quality of product to satisfy customers with technique and innovated skill such as cost reduction product for customers. It also has adopted eco-friendly recognition program; ISO9002, ISO14001.
We have several types of electronic material products, such as insulation and damp-proofing material, cleansing agent, OCR (Optical Clear Resin) for luminance improvement, fluorescent substance, radiant heat material, white EMC for LED reflection, etc.
Types of Electronic Material Product of Hansol Chemical
1. Conformal Coating Materials
- by coating it on the electrode joint part of FPD panel of display.
- Used to protect electrode from dusts and foreign objects.
- Superior damp-proofing and insulation
- Fast hardening : low radiation intensity, high hardening rate
- Good inner migration
2. PI Electrode Reinforcer
- OLED electrode joint part reinforcer/protector
3. OCR : Optical Clear Resin
- This is resin that Increases clarity of OLED/LCD display, shock resistancy and legibility on the outter surface.
- Substitute optical tape to UV hardening resin
- Elliminate the air layer and achieves the same refractive index with the cover glass.
- Improves luminance and contrast by reducing light scattering.
4. Side Sealing Resin
- Resin that is used to protect the side of panel and to block the light
5. Cleasning Solution (electrode protector/for OCR, etc)
- To prevent and cleaning nozzle hardening of dispenser method
- To clean OLB (Outer lead bonding) process, OCR and ACF rework
6. OLED Organic Insulation Film Material
- Is an organic insulation film material that can separate between two fluorescent substances of OLED display and helps two electrodes become short circuit.
Hansol Chemical is putting its effort to increase competitivness of product cost and quality of product to satisfy customers with technique and innovated skill such as cost reduction product for customers. It also has adopted eco-friendly recognition program; ISO9002, ISO14001.
Subscribe to:
Posts (Atom)